11.80CHF
ab 10 10.57CHF
ab 50 9.91CHF
ab 100 9.35CHF

NTE712 TV/FM Sound IF Detector PDIP-14

Bestell-Nr.:    NTE712


Verfügbarkeit:     PICTURE_ONLY_FOUR
  Sofort lieferbar!


NTE712 TV/FM Sound IF Detector PDIP-14

Info als pdf File

Description:

The NTE712 is a versitile device in a 14-Lead DIP type package incorporating IF limiting, detection, electronic attenuation, audio amplifier, and audio driver capabilities.

Features:

  • Differential Peak Detector Requiring a Single Tuned Circuit
  • Electronic Attenuator Replaces Conventional AC Volume Control: range > 60dB
  • Excellent AM Rejection @ 4.5 and 5.5MHz
  • High Stability
  • Low Harmonic Distortion
  • Audio Drive Capability: 6mAP-P
  • Minimum Undesirable Output Signal @ Maximum Attenuation
Absolute Maximum Ratings: (TA = +25°C unless otherwise specified)
Input Signal Voltage (Pin1 and Pin2)     ±3V
Power Supply Current     50mA
Power Dissipation, PD     625mW
            Derate Above +25°C     5mW/°C
Operating Ambient Temperature Range, Topr     -20° to +75°C
Storage Temperature Range, Tstg     -65° to +150°C

Electrical Characteristics: (TA = +25°C, V+ = 24V unless otherwise specified)

Parameter Pin Test Conditions Min Typ Max Unit
Regulated Voltage 5   10.3 11.0 12.2 V
DC Supply Current 5 V+ = 9V, RS = 0 10 16 24 mA
Quiescent Output Voltage 12   5.1 - - V

Dynamic Characteristics: (TA = +25°C, V+ = 24V unless otherwise specified)

Parameter Test Conditions Min Typ Max Unit
IF Amplifier and Detector (fo = 4.5MHz, f = ±25kHz)
AM Rejection Vin = 10mVrms, Note 1 40 51 - dB
Input Limiting Threshold Voltage   - 200 400 µVrms
Recovered Audio Output Voltage Vin = 10mVrms 0.5 0.7 - Vrms
Output Distortion Vin = 10mVrms - 0.4 2.0 %
IF Amplifier and Detector (fo = 5.5MHz, f = ±50kHz)
AM Rejection Vin = 10mVrms, Note 1 40 53 - dB
Input Limiting Threshold Voltage   - 200 400 µVrms
Recovered Audio Output Voltage Vin = 10mVrms 0.5 0.91 - Vrms
Output Distortion Vin = 10mVrms - 0.9 - %
Input Impedance Components Parallel Input Resistance f = 4.5MHz, measurement between Pin1 and Pin2 - 17 - k Ohm
Parallel Input Capacitance - 4 - pF
Output Impedance Components Parallel Output Resistance f = 4.5MHz, measurement between Pin9 and GND - 3.25 - k Ohm
Parallel Output Capacitance - 3.6 - pF
Output Resistance Pin7   - 7.5 - k Ohm
Pin8 - 250 - Ohm
Attenuator
Volume Reduction Range DC Volume Control = Infinity 60 - - dB
Maximum Undesirable Signal DC Volume Control = Infinity, Note 2 - 0.07 1.0 mV
Audio Amplifier
Voltage Gain Vin = 0.1Vrms, f = 400Hz 1.75 20.0 - dB
Total Harmonic Distortion VO = 2Vrms, f = 400Hz - 2.0 - %
Output Voltage THD = 5%, f = 400Hz 2.0 3.0 - Vrms
Input Resistance f = 400Hz - 70 - k Ohm
Output Resistance f = 400Hz - 270 - Ohm

Note 1.100% FM, 30% AM Modulation.
Note 2.Undesirable signal is measured at Pin8 when volume control is set for minimum output.



Fehler und Änderungen bei technischen Daten, Abmessungen und Preisen bleiben vorbehalten. Bild kann vom Original abweichen.
Hat sich ein Fehler eingeschlichen? Bitte hier melden


Suchen Sie nach einem Ersatztypen?
Wir führen die NTE Austausch-Halbleiter in unserem Sortiment

Anmerkung zu den NTE/ECG Austauschhalbleiter:
NTE-Austauschhalbleiter (früher ECG Philips und Sylvania) sind sorgfältig ausgesuchte und erprobte Halbleiter, die einen sicheren Ersatz für Originaltypen verschiedenster Hersteller und Ursprünge für fast alle Applikationsbereiche im Wartungsdienst bieten.
Alle NTE-Austausch-Halbleiter sind einzeln in durchsichtigen Plastikbeuteln verpackt, auf welchen die wichtigsten Daten vermerkt sind. Sprachen integrierter Schaltkreis integrated circuit, kurz IC, Mikrochip Microchip integreret kredsløb integreret kredslob circuito integrado (CI) circuit intégré (CI) circuit integre (CI) circuito integrato geïntegreerde schakeling geintegreerde schakeling Tümdevre Tuemdevre

NTE-ECG replacement list as pdf-file
Diagrams and Info of most NTE-ECG Components

Anzahl:
Bewertungen

Kunden, die dieses Produkt gekauft haben, haben auch folgende Produkte gekauft:
Schnellsuche
1 x Federleiste 90G abgewinkelt fuer Printmontage 64p a+c
1 x Print Stiftleiste horizontal 34p Low Prof RM=2.54mm
1 x Print-Transformator 10VA Prim=230VAC Sek=2x6V 2x830mA
1 x Gluehlampe 24V 125mA 3W (9x23mm) Ba9s Bailey B23024125
1 x Schutzdiode 1500W/1ms 43V Unidirektional DC Typ 1.5KE43A 1N6286A
1 x Sicherheits-Messleitungen schwarz 1m Typ MLS GG 100/1
1 x 1.0A 5V Step-Down Voltage Regulator PDIP-16 Type LM2575N-5.0
1 x Kupplung 90°-Winkel 5-pol DIN45322 IP40
1 x Telefonlampe 28V 40mA (5.4x22mm) T5.5K Bailey T5628040
1 x Blech-Kleingehaeuse mit 1 Deckel 63.5x44x17.5mm Teko-Serie 45
1 x IDC-Buchsenleisten 10-pol 17.16x13.33mm RM=2.54mm, RoHS
1 x Integrated Circuits DIL-16 Typ: V9151C 16PE
1 x 4x4 Register Files with 3-State Outputs PDIP-16 Type SN74LS670N
1 x XLR-Kabelbuchse 90° 6-pol schwarz/gold NEUTRIK NC6FRC-B
1 x NTE319 NPN Si-Transistor VHF Amplifier with Forward AGC TO-72
1 x Widerstand 5k442 0.6W 25ppm 0.1% bei P0
1 x Draht-Widerstand 120R 17W Tol=5%, RoHS
1 x Metallfilm-Widerstand 820k 1W 10000VDC Tol=5%
1 x Powerval fuse CAL.2 68x6x16.3x10,6mm
1 x Metallfilm-Widerstand 590k 0.6W Tol=1%
1 x UP-Netzteil Konstantstrom 15-30VDC 0.7A 20W mit 16cm Kabel IP67
1 x Metallfilm-Widerstand 6.49k 0.6W Tol=1%
1 x P-Kanal MOSFET 7A 160V
1 x 8 to 3 Priority Encoder PDIP-16 Type SN74148
1 x Leistungs-Metallfilm-Widerstand 2.7R 1W Tol=5%
1 x USV-Anlage 1000VA 600W USB-Schnittstelle
1 x Miniatur-Relais 24V 2xEin/Ein 250VAC 5A OMRON G2R-2-SN
1 x NiMH Akku 1.2V 1000mAh AAA / LR03
1 x Batterie-Ladeklemme blank 25A Markierung=positiv
1 x Loetauge mit Leiterzuegen (100 Stk) 30.48mm 40-pol 2zu1
1 x Audio- und Datenleitung Munflex-LiYCY 40x0.14mm2 geschirmt
1 x Transformator 120VA Prim=230VAC Sek=2x0-10-12-15V 2x4A
1 x 8-Bit Pi/So Shift Register PDIP-16 Type PC74HC165P
1 x Schaltnetzteil 30W 12VDC/2.5A mit Schraubklemmen, RoHS2
1 x Symbol D-Sub (164 Kontakte) 2zu1 BISHOP 6839
1 x Opto Sensor M8x1 Male 4-Pin PNP NO/NC Balluff BOS00A9
1 x Draht-Widerstand in Alugehaeuse 39R 50W Tol=5%
1 x Thyristor 10A 600V TO-220AB Type S2800M
1 x Push-Pull Kabelstecker 5-Pol male 180VAC 5A IP67 WEIPU Serie SF,
1 x Ringkern-Print-Transformator 3.2VA Prim=2x115VAC Sek=2x9,0VAC 2x
1 x 6-Kant-Distanzbolzen Polyamid schwarz L=15mm Bolzen/Gewinde M4
1 x Metallfilm-Widerstand 499R 0.6W Tol=1%
1 x Schlitz-Schraubendreher 2.5x75mm
1 x Aluminium-Gehaeuse 146x222x106mm
1 x Octal D-Type Transp Latch Flip-Flop PDIP-20 Type SN74LS374N
1 x Leistungs-Metallfilm-Widerstand 200R 2W Tol=5%
1 x FLUKE C75 Zubehoertasche 179x103x26mm
1 x Dual LinCMOS Differential Comparator PDIP-8 Type TLC372CP
1 x 18-gang Trimm-Potentiometer 22k 0.75W Tol=10%
1 x Schaltnetzteil 12VDC 2A 24W für DIN-Schienen Montage, RoHS2
1 x ABS Gehaeuse 90x57x24mm weiss Teko 10016.7
1 x Stereokabel ZNK 1/4-SIAM, schwarz, 1,5 Meter beidseitig 2 x NP2X
1 x Leistungs-Metallfilm-Widerstand 75k 2W Tol=5%
1 x NTE5888 Rectifier Diode 25A 1200V DO-4
1 x Draht-Widerstand mit Abgriffschelle 3.9k 100W Tol=10%
1 x NTE239 Silicon Controlled Switch (SCS) TO-72
1 x NTE2086 IC 4-Stage Darlington Array DIP-16
1 x Metallfilm-Widerstand 68k 0.25W Tol=5%
1 x Trimm-Potentiometer horizontal 22k 0.5W
1 x DIL-Symbol (1 Stk) 15.24mm 16-pol 2zu1
1 x Tandem-Potentiometer 16mm linear 2.2M 20%
1 x Schutzdiode 1500W/1ms 170V Unidirektional DC Typ 1.5KE170A
1 x VDR-Widerstand 275VAC 350VDC 13.5mm
1 x Quad JFET Operational Amplifier PDIP-14 Type TL084CN
1 x Draht-Widerstand mit Abgriffschelle 100R 100W Tol=10%
1211.50CHF
Hersteller
Hersteller Info
andere Produkte
Sprachen
English Deutsch
Währungen