NTE722 FM Stereo Multiplex Decoder PDIP-14
Info als pdf File
Description:
The NTE722 is a monolithic FM Stereo Multiplex Decoder System in a 14-Lead DIP type package. This integrated circuit demodulated a stereo multiplex signal into the right and left audio channels while inherently suppressing SCA frequency components. Internal provision is made for driving an external stereo mode indicator lamp. The excellent performance, wide supply range and low external parts requirement make the NTE722 suitable for all line-operated and automotive FM stereo multiplex applications.
Features:
- 45dB Channel Separation
- 55dB Storcast Rejection without SCA Filters
- High Current Stereo Indicator Lamp Driver
- Operation with 8V to 14V Supplies
Absolute Maximum Ratings:
| Supply Voltage (Note 1), V+ |
|
15 |
| Voltage at Stereo Lamp Driver Terminal |
|
22V |
| Current into Stereo Lamp Driver Terminal (Note 2) |
|
100mA |
| Internal Power Dissipation, PD |
|
670mW |
| Operating Temperature Range, Topr |
|
0° to +70°C |
| Storage Temperature Range, Tstg |
|
-55° to +125°C |
| Lead Temperarture (During Soldering, 10sec max), TL |
|
+260°C |
| Note 1. | Power supply transients up to 22V are permissible for periods of 15 seconds. However, extended operation at voltages greater than 15V should be avoided as the maximum allowable internal power dissipation for this device may be exceeded. |
| Note 2. | Rating applies to steady state current. Maximum permissible surge current during turn-on of the Stereo Indicator Lamp is 500mA. |
Electrical Characteristics: (TA = +25°C, V+ = 12V, 200mVRMS standard stereo multiplex signal applied to input, Note 3 unless otherwise specified)
| Parameter |
Test Conditions |
Min |
Typ |
Max |
Unit |
| Supply Current |
|
- |
12 |
18 |
mA |
| Input Resistance |
|
12 |
20 |
- |
k Ohm |
| Stereo Separation |
f = 100Hz |
- |
40 |
- |
dB |
| f = 1kHz |
30 |
45 |
- |
dB |
| f = 10kHz |
20 |
40 |
- |
dB |
| Channel Balance (Monaural Input) |
|
- |
0.2 |
- |
dB |
| Total Harmonic Distortion |
|
- |
0.5 |
1.0 |
% |
| Voltage Gain |
|
- |
1.0 |
- |
V / V |
| 67kHz Storcast Rejection |
Note 4 |
- |
55 |
- |
dB |
| 19kHz Pilot Level Required at Input |
Stereo Indicator Lamp ON |
- |
12 |
22 |
mVRMS |
| Stereo Indicator Lamp OFF |
4.0 |
8.0 |
- |
mVRMS |
| High Frequency Audio Components in Left and Right Outputs (dB Below 1lHz Output) |
19kHz |
- |
30 |
- |
dB |
| 38kHz |
- |
25 |
- |
dB |
| Note 3. | "Standard Stereo Multiplex Signal" here refers to a 200mVRMS (0.56VP-P) composite stereo signal including 10% pilot with L = 1 and R = 1 as described in the FCC Rules of FM Broadcasting. |
| Note 4. | Measured with a stereo composite signal consisting of 80% stereo, 10% pilot and 10% SCA as defined in the FCC Rules of FM Broadcasting. |
Fehler und Änderungen bei technischen Daten, Abmessungen und Preisen bleiben vorbehalten. Bild kann vom Original abweichen.
Hat sich ein Fehler eingeschlichen?
Bitte hier melden
Suchen Sie nach einem Ersatztypen?
Wir führen die NTE Austausch-Halbleiter in unserem Sortiment
Anmerkung zu den NTE/ECG Austauschhalbleiter:
NTE-Austauschhalbleiter (früher ECG Philips und Sylvania) sind sorgfältig
ausgesuchte und erprobte Halbleiter, die einen sicheren Ersatz
für Originaltypen verschiedenster Hersteller und Ursprünge für
fast alle Applikationsbereiche im Wartungsdienst bieten.
Alle NTE-Austausch-Halbleiter sind einzeln in durchsichtigen
Plastikbeuteln verpackt, auf welchen die wichtigsten Daten
vermerkt sind.
Sprachen integrierter Schaltkreis integrated circuit, kurz IC, Mikrochip Microchip integreret kredsløb integreret kredslob circuito integrado (CI) circuit intégré (CI) circuit integre (CI) circuito integrato geïntegreerde schakeling geintegreerde schakeling Tümdevre Tuemdevre
NTE-ECG replacement list as pdf-file
Diagrams and Info of most NTE-ECG Components
