NTE7000
Integrated Circuit 5W Audio Amplifier with Muting
16-PIN DIP

Description:
The NTE7000 is a monolithic integrated circuit in a 16-Lead DIP type package intended for use as a low frequency power amplifier in a wide range of applications in radio and TV sets.

Features:
- Muting Facility
- Protection Against Chip Over Temperature
- Very Low Noise
- High Supply Voltage Rejection
- Low “Switch-On” Noise
- Voltage Range: 4V to 30V

Info as pdf-file
NTE-ECG replacement list as pdf-file
Diagrams and Info of most NTE-ECG Components

Absolute Maximum Ratings:
Supply Voltage, VS.................................................................30V
Output Peak Current, IO
Non-Repetitive...............................................................3A
Repetitive.................................................................. 2.5A
Input Voltage, VI.............................................................0 to +VS V
Differential Input Voltage, VI.........................................................±7V
Muting Threshold Voltage, V11...................................................... VS V
Power Dissipation, Ptot
TA = +80°C.................................................................. 1W
TC = +60°C.................................................................. 6W
Junction Temperature Range, Tj...........................................-40° to +150°C
Storage Temperature Range, Tstg.......................................... -40° to +150°C

Electrical Characteristics: (T_A = +25°C, R_th(heatsink) = 20°C/W unless otherwise specified)

Parameter	Symbol	Test Conditions		Min	Typ	Max	Unit
Quiescent Drain Current Current	Id	VS = 4V		-	15	-	mA
		VS = 14V		-	17	-	mA
		VS = 30V		-	21	35	mA
Output Stage Saturation Voltage	VCE(sat)	IC = 1A		-	0.5	-	V
		IC = 2A		-	1.0	-	V
Output Power	PO	d = 10%, f = 1kHz	VS = 9V, RL = 4 Ohm, Note 1	2.2	2.5	-	W
			VS = 14V, RL = 4 Ohm	5.0	5.5	-	W
			VS = 18V, RL = 8 Ohm	5.0	5.5	-	W
			VS = 24V, RL = 16 Ohm	4.5	5.3	-	W
Total Harmonic Distortion	THD	f = 1kHz	VS = 9V, RL = 4 Ohm, PO = 50mW to 1.5W	-	0.1	-	%
			VS = 14V, RL = 4 Ohm, PO = 50mW to 3W	-	0.1	-	%
			VS = 18V, RL = 8 Ohm, PO = 50mW to 3W	-	0.1	-	%
			VS = 24V, RL = 16 Ohm, PO = 50mW to 3W	-	0.1	-	%
Input Sensitivity	Vi	f = 1kHz	VS = 9V, RL = 4 Ohm, PO = 2.5W	-	37	-	mV
			VS = 14V, RL = 4 Ohm, PO = 5.5W	-	49	-	mV
			VS = 18V, RL = 8 Ohm, PO = 5.5W	-	73	-	mV
			VS = 24V, RL = 16 Ohm, PO = 5.3W	-	100	-	mV
Input Saturation Voltage (rms)	Vi	VS = 9V		0.8	-	-	V
		VS = 14V		1.3	-	-	V
		VS = 18V		1.8	-	-	V
		VS = 24V		2.4	-	-	V
Input Resistance (Pin8)	Ri	f = 1kHz		0.8	-	-	V
Drain Current	Id	f = 1kHz	VS = 9V, RL = 4 Ohm, PO = 2.5W	-	380	-	mA
			VS = 14V, RL = 4 Ohm, PO = 5.6W	-	550	-	mA
			VS = 18V, RL = 8 Ohm, PO = 5.5W	-	410	-	mA
			VS = 24V, RL = 16 Ohm, PO = 5.3W	-	295	-	mA
Efficiency		f = 1kHz	VS = 9V, RL = 4 Ohm, PO = 2.5W	-	73	-	%
			VS = 14V, RL = 4 Ohm, PO = 5.5W	-	71	-	%
			VS = 18V, RL = 8 Ohm, PO = 5.6W	-	74	-	%
			VS = 24V, RL = 16 Ohm, PO = 5.3W	-	75	-	%
Small Signal Bandwidth (-3dB)	BW	VS = 14V, RL = 4 Ohm, PO = 1W		40 to 40,000			Hz
Voltage Gain (Open Loop)	GV	VS = 14V, f = 1kHz		-	75	-	dB
Voltage Gain (Closed Loop)	GV	VS = 14V, RL = 4 Ohm, f = 1kHz, PO = 1W		39.5	40.0	40.5	dB
Total Noise Input	eN	Rg = 50 Ohm		-	1.2	-	µV
		Rg = 1k Ohm		-	1.3	-	µV
		Rg = 10k Ohm		-	1.5	4.0	µV
		Note 2	Rg = 50 Ohm	-	2.0	-	µV
			Rg = 1k Ohm	-	2.0	-	µV
			Rg = 10k Ohm	-	2.2	5.0	µV
Signal-to-Noise Ratio	S/N	VS = 14V, PO = 5.5W, RL = 4 Ohm	Rg = 10k Ohm	-	90	-	dB
			Rg = 0	-	92	-	dB
			Rg = 10k Ohm, Note 2	-	87	-	dB
			Rg = 0, Note 2	-	87	-	dB
Supply Voltage Rejection	SVR	VS = 18V, RL = 8 Ohm, Rg = 10k Ohm, fripple = 100Hz, Vripple = 0.5Vrms		40	50	-	dB
Thermal Shut-Down Case Temperature	Tsd	Ptot = 2.5W		-	115	-	°C
Muting-Off Threshold Voltage (Pin4)	VT(OFF)			1.9	-	4.7	V
Muting-On Threshold Voltage (Pin4)	VT(ON)			0	-	1.3	V
				6.2	-	VS	V
Input Resistance (Pin5)	R5	Muting OFF		80	200	-	k Ohm
		Muting ON		-	10	30	Ohm
Input Resistance (Pin4)	R4			150	-	-	k Ohm
Muting Attenuation	AT	Rg + R1 = 10k Ohm		50	60	-	dB

Note 1.	With an external resistor of 100 Ohm between Pin3 and +VS.
Note 2.	Filter with noise bandwidth:  22Hz to 22kHz.

Unser Halbleiter Katalog (ohne NTE-Sortiment)
NTE Sortiment (unser ganzes Sortiment)
Einzel-Halbleiter (ganzes Sortiment)

Fehler und Änderungen bei technischen Daten, Abmessungen und Preisen bleiben vorbehalten. Bild kann vom Original abweichen.
Hat sich ein Fehler eingeschlichen? Bitte hier melden


Suchen Sie nach einem Ersatztypen?

Anmerkung zu den NTE/ECG Austauschhalbleiter:
NTE-Austauschhalbleiter (früher ECG Philips und Sylvania) sind sorgfältig ausgesuchte und erprobte Halbleiter, die einen sicheren Ersatz für Originaltypen verschiedenster Hersteller und Ursprünge für fast alle Applikationsbereiche im Wartungsdienst bieten.
Alle NTE-Austausch-Halbleiter sind einzeln in durchsichtigen Plastikbeuteln verpackt, auf welchen die wichtigsten Daten vermerkt sind.